Top 5 Tricks and Tips to Boot Up Computer Faster

Top 5 Tricks and Tips to Boot Up Computer Faster

1)Regular Hard Disk Checkup

Over the Time Hard Disk gets Degraded not only Physically but also Digitally. So it’s Important to Monitor the Hard Disk's Drive Health. Any Error or Damaged Sector can throw the Software Loading into an Infinite Loop and thus Causing the Long Load Times. So to check the Hard Disk's Drive Health follow these simple steps : 

1. Click Start  >>  Computer  >>  Right Click the Partition to be Checked  >>  Properties  >>  Tools. 
2. Now Under " Error - Checking ", Click " Check Now ". Now a Pop Window will come and on that Check the both Options i.e. " Automatic Fix File System Errors ", and " Scan For and Attempt Recovery of Bad Sectors ". 
3. After this the Error Check would Start and it might take some Time according to the Disk Size. 
4. Now Hard Disk Check Up has been Completed. 

2) Eliminate Startup Delay 

To get Faster Boot Up Speed, We can cut the Boot Delay to 0. The delay is in place to allow your Startup Processes some Breathing Room during Loading. The Default Delay is 30 seconds and We can Change it to 0 and Eliminate it for Faster Boot Up Times. So to Eliminate the Startup Delay follow given below Steps : 

1. Click Start  >>  Run  >>  Type " msconfig " ( Without Quotes )  >> Press Enter. 
2. Now the System Configuration Utility Windows will Open. 
3. Now Click Boot Tab. In the Boot Menu, Change the Default Setting for the Time Out from 30 any Less Number of Seconds You Want. 
4. We Recommend the minimum of 3 Seconds. 
5. Now Startup Delay has been Eliminated. 

3) Organize the Hard Disk 

Over the Time, Storage System of the Hard Disk gets Disorganized  So we need to Reorganize this Storage System on the Hard Disk. Windows has a Default Utility called Disk Defragmenter that will put the Hard Disk of the System in Order. So to use this Utility follow given Below Steps : 

1. Click Start  >>  Computer  >>  Right Click any Disk Drive  >> Properties  >>  Tools. 
2. Choose Defragment. 
3. Now in the Disk Defragmenter Utility, Click Defragment. 
4. You have to Defragment each of the Disk Partitions Individually. 
5. Now the Organization of Disk has been Completed.

4) Remove Unwanted Startup Programs 

Whenever we Install a New Program, most of them Opts to Load on the Computer Startup. The process of Loading Up these Programs at Startup can reduce the Booting Times. So We need to Reduce these Startup Programs. So to Reduce and Disable the Unwanted Startup Programs follow given below steps : 

1. Click  Start  >>  Run  >>  Type " msconfig "  >>  Press Enter. 
2. Now the System Configuration Utility will Open. Now Click Startup Tab. 
3. Uncheck the Programs that You no Longer Want to Run on the Startup and Click OK. 
4. Now Unwanted Startup Programs have been Removed. 

5) Remove Unwanted Startup Services 

There are many Windows Services which also requires the Loading Up at Startup and can reduce the Booting Times. So We need to Disable these Startup Services. So to Reduce and Disable the Unwanted Startup Services follow given below steps : 

1. Click  Start  >>  Run  >>  Type " msconfig "  >>  Press Enter. 
2. Now the System Configuration Utility will Open. Now Click Services Tab. 
3. Uncheck the Services that You no Longer Want to Run on the Startup and Click OK. 
4. Now Unwanted Startup Services have been Removed.

So these are Top 5 Tricks and Tips to Boot Up Computer Faster.

Read More

How to Increase USB or Pen Drive Speed With Simple Trick

Trick to Increase USB or Pen Drive Speed

Ferozaa Trik

The Pen drive or USB that you use may not be so slow that it seems to be. It might be some configuration or settings are missing from your computer which helps in speeding your USB or Pen drive. So there is Trick to increase USB or Pen Drive Speed by more than two times. This trick can improve the USB or Pen drive performance and moreover speed up the computer to some extent. 

Note : Before using this Trick, backup all the data present in your USB or Pen drive. 

To use this Trick just follow the simple steps :

• Connect the USB or Pen Drive to Computer. 
• Open My Computer  >>  Right Click USB or Pen Drive  >>  Properties. 
• Then on the Hardware Tab select the USB or Pen Drive connected and then click Properties  >>  Policies Tab. 
• Now select "Optimize for Performance" option rather than "Optimize for Quick Removal" and click Ok. 
• Now just format the USB or Pen Drive with NTFS File System by selecting format option from the drop down menu of formatting. 

Now it is done.  

Read More

How To Download Latest Hindi,English,Dubbed Movies Free & Easily

Download Torrent Files Easily

What Is A Torrent File

A torrent file is a small text file associated with specific content. When the torrent is opened in a bittorrent client, transfer of the associated content begins.So you need a bittorrent client.

How To Download It

There are many Bitorrent softwares to download torrent file but the best is vuze

About  VUZE

The Vuze Bittorrent Client is an end-to-end application for all your torrent needs. Although it is a complete bittorrent downloader, Vuze maintains a lightweight footprint, doesn't slow your computer down, and quickly downloads torrents. Vuze makes it easy for you to find torrents anywhere, whether you are downloading torrents from a tracker site or anywhere else on the web. Once you find a torrent the Vuze Bittorrent Client makes it simple to download torrents and automatically optimizes torrent download speeds. Once your downloaded torrents are finished Vuze makes it straightforward and simple to watch and listen to the content you downloaded. Vuze simply covers anything you'll run into when downloading bittorrent torrents.

How To Download Torrent From  VUZE

1. First of all download an instaal vuze
2. Then download torrent file
3. Double click on torrent file
4. File will begin downloading in VUZE
5. After downloading Copy or cut Movie or Game whatever u download from 
6. my document>>>VUZE folder
7. After copy delete the file from VUZE library
8. And enjoy

CLICK HERE TO DOWNLOAD VUZE

Read More

How to disable & enable usb with regedit

How to disable & enable usb with regedit

Just Open Notepad Paste The Following Code  

write on note pad following html java or copy from here and paste it in note pad 

and enjoy

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR]
"Type"=dword:00000001
"Start"=dword:00000004
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
  52,00,49,00,56,00,45,00,52,00,53,00,5c,00,55,00,53,00,42,00,53,00,54,00,4f,\
  00,52,00,2e,00,53,00,59,00,53,00,00,00
"DisplayName"="USB Mass Storage Driver"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Security]
"Security"=hex:01,00,14,80,90,00,00,00,9c,00,00,00,14,00,00,00,30,00,00,00,02,\
  00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
  00,00,02,00,60,00,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
  05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
  20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,\
  00,18,00,fd,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,\
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Enum]
"Count"=dword:00000000
"NextInstance"=dword:00000000



Now  Save It To "Disable_usb.reg"
Double click  on Disable_usb.reg file then click on yes

Enable USB :-

Just Open Notepad Paste The Following Code

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR]
"Type"=dword:00000001
"Start"=dword:00000003
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
  52,00,49,00,56,00,45,00,52,00,53,00,5c,00,55,00,53,00,42,00,53,00,54,00,4f,\
  00,52,00,2e,00,53,00,59,00,53,00,00,00
"DisplayName"="USB Mass Storage Driver"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Security]
"Security"=hex:01,00,14,80,90,00,00,00,9c,00,00,00,14,00,00,00,30,00,00,00,02,\
  00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
  00,00,02,00,60,00,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
  05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
  20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,\
  00,18,00,fd,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,\
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Enum]
"0"="USB\\Vid_054c&Pid_0243\\5A0811040079772"
"Count"=dword:00000001
"NextInstance"=dword:00000001


Now  Save It To "Enable_usb.reg"

Double click  on Enable_usb.reg file then click on yes

Read More

How to Password Protect USB Drive in windows 7

How To Create Password USB In Window 7

USB PASSWORD  WWW.FEROZAA.BLOGSPOT.COM

Set a Password to your USB Ports

Windows 7 BitLocker

Windows 7 | BitLocker

It is very important to keep your USB drive or external hard drive safe if you have lots of valuable data in it. To protect your data from others you should have to set up a password for the flash drive. Windows 7 lets you protect or lock your hard disk and removal drives by its Bit-locker feature.

The bit - locker is an encrypting tool, built-in with your Windows 7 OS. It can encrypt your whole drive and lock it by your given password. To access into the encrypted drive, one should provide the correct password.

To run the BitLocker you may need the administrator privilege. Learn how to enable administrator account in Windows 7.
This tutorial will describe the steps how to use the BitLocker and setting up a password to USB free. By this procedure you can also protect your external hard disk or internal hard disk drives.

Protect USB drive by BitLocker:

To find out the Windows Bit-Locker easily, type "bit locker" in the start menu search box. Or, you can go to Control Panel > System and Security > BitLocker Drive Encryption.

Control Panel > System and Security > BitLocker Drive Encryption

Click on the "Manage BitLocker" and the window will show you to "turn on BitLocker" to the specific drive.
Now click on "turn on BitLocker" beside your selected drive. Then the BitLocker will start and will ask you how you want to unlock the drive.

Choose how you want to unlock the drive

Select "Use a password to unlock the drive" and type your password. Then select a method to recover your password/key and press Next to start the encryption.

Encrypting

It would take a few minutes, depending on the size and the format of your drive.
You are done! From now any user of Windows 7/Vista/XP must provide the password to open your USB drive.

You may need to know: How to Remove Password from BitLocker.

Read More

How To Use PenDrive As Ram | Boost PC Speed

How To Use PenDrive As Ram | Boost PC Speed

1. First Go To Control Panel from my computer or startup

2. Then click on System And Security and then System.

3. Now click on "Advance System Settings" at left side

4. Click on Settings and the go to Advanced Tab and then Settings > Advanced

5. Now, you can see Virtual Memory, just click on Change

6. Here you have to uncheck "Automatically manage paging file size"

7. Now, click on your pen drive, and set the custom size.

8. Ex. In 4 GB pen drive, 700 is initial size and 3000 is maximum size.

Note :- You computer will restart and then you can see instant boost in your computer's performance.


THATS ALL ENJOY............????

Read More

How To Create Shutdown,Reboot,Logoff,Restart Icon Button On Desktop

How To Create Shutdown,Reboot,Logoff,Restart Icon Button On Desktop

1. Right-click on an empty area on the desktop. You’ll see a menu.
   
    In the menu, select New, and then Shortcut.

2. Click on Shortcut. The “Create Shortcut” Wizard will pop up.

3. Where it asks you to type the location of the item, type the following:  shutdown -s -t 05

 4. Here 00 is the time in seconds. it means system will shutdown with in 5 seconds .

5. We can increase or decrease this time as per need.

6. Click on Next and a screen will ask you what you would like to name your shortcut.

7. Name it anything. “Shut Down”. Now click Finish.

8. we are done.

NOTE::

1. for reboot type this in 3rd step ---- shutdown -r -t 00

2. for logoff type this ---- shutdown -l -t 00

3. for hibernate type this ----

   %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState Hibernate

4. for Stand by type this ----

   %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState standby



Written by M.Bilal Khan
Thursday, 20 april 2013 21:10

Read More

How To Add Your Name In THe Taskbar

How To Add Your Name In The Taskbar

Show your name in the taskbar after time.... 

1. Go to start then Control panel.

2. click on Regional and language option --> click on customize ---> select Time tab.

3. Change the AM and PM symbol from AM and PM to your name or any text that
     you would like to  appear on your taskbar.

4. click on apply --> ok --> apply ---> ok.

5. Now you will see your typed text in the taskbar.

6. In case , if there is no change then go to taskbar and double click on the time
    and date property -->

7. In the time area in digital form --> click on the arrow to change AM and PM by
    selecing and pressing arrow.

8. It will show your name or text --> then click on apply and enjoy.

Written by M.Bilal Khan   

Thursday, 20 april 2013 21:02

Read More

How To Check Your PC Is Mail or Female

How To Check Your PC Is Mail or Female

Check Whether Your PC is Male or Female To find out whether your computer is male or female just follow the steps given below. 1 : First of all open Notepad. 2 : Now type the code given below in notepad: CreateObject("SAPI.SpVoice").Speak"i love you" 3 : Now save the file on desktop as computer_gender.vbs. 4: This file will appear on desktop. 5 : Double click the file to run it. If you hear a male voice, your computer is a male and if you hear a female voice. Then your computer is a female. So what are you waiting for?  Check now whether your computer is male or female and  share your computer’s gender with us. Written by    Bilal khan    Thursday, 20 april 2013 21:06

Read More

How To Creat Self Antivirus With Notepad

How To Creat Self Antivirus With Notepad 

Hi friends....???

Here are simple ways to clean viruses in our computers. We can make your own antivirus with software built using the Windows named Notepad. Apart from minor product files, notepad can save files to a variety of other applications programs, such as html, java script and so on.

However, the virus that can be eliminated by our anti-virus is only a low level as macro viruses and an equal. For heavy virus, would have to use anti-virus that is more powerful. However, these tutorials can teach you the basic knowledge about how the anti-virus.

Type the following code into Notepad or Copy This Text And Paste Into Notepad

@ echo off echo off turn off the active virus taskkill / F / IM virusname1.exe / IM virusname2.exe echo Deleting all of viruses based on size for / RC: \%% a in (*. exe) do if%% ~ za 157,184 equ del / A: HSRA "%% a" echo deleting hidden virus echo for drive c and subfolders for / R C: \%% a in (*. doc.exe) do del "%% a" echo for drive d and subfolders for / R D: \%% a in (*. doc.exe) do del "%% a" echo Unhide Document cd / d c: \ echo for drive C and subfolders *. doc attrib-H-S-A / S cd / d d: \ echo for drive D and subfolders *. doc attrib-H-S-A / S

And Save>>>>>>ENJOY APNA ANTIVIRUS

Read More

How To Boost Internet Speed Without Any Software

How To Boost Internet Speed Without Any Software

Above 90% computers all over the world run Windows... and hence another computer trick.

FACT
But do you know that about 20% of your internet bandwidth is reserved by Microsoft.

Uses of Reserved Bandwidth
** Windows Automatic Updates rely on this reserved bandwidth.
** Fast loading Microsoft Websites
** Sending Error Reports
** Online Help support in Microsoft Office

But this can be recovered back...

The Remedy** Start >> Run

** Type gpedit.msc** This opens the Policy Editor** Now, Local Computer Policy >> Computer Configuration

• ** Then, Administrative Templates >> Network
• ** Now, click on QOS Packet Scheduler
• ** Now, on Right hand side
• ** Double Click Limit reservable bandwidth
• ** Now in Setting Tab

**** NOTE ****   It says : Not Configured Reality : The Explain Tab says "By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection"
** So, on Setting Tab select Enabled** Now, change Bandwidth limit (%) to 0 (Zero)


**** NOTE **** Misconcept : This don't means that you won't be able to communicate with Microsoft or any its services !!!
Actually : This reserved Bandwidth is only to accelerate Microsoft internet connections more than other connections !!!
** Click OK !!!
That's All !!!

Read More